Hardwood contains a cell structure; therefore, if enough pressure is applied, the cell wall will collapse and a dent will appear.

Wood goes through a natural aging process called patina. Bright sunlight can also accelerate this condition. It is recommended to move area rugs or other items that may cause this effect from time to time to avoid obvious differences in color.

There are a number of possible reasons for this condition. Usually it is caused by uneven sub-floors (see manufacturer’s instructions for sub-floor tolerances). Improper trowel or improper adhesive could also cause this. Please use all items, tools and adhesives recommended for the Franklin, TN hardwood flooring product being installed. In most cases, the problem is easily corrected.

It is not recommended, due to the high moisture associated with these areas. It may cause unfavorable conditions for hardwood flooring in Franklin, TN.

It is a matter of personal preference. Both options have their own advantages. For example, if you want to match the existing woodwork, you may wish to go with unfinished so that it can be stained on-site to blend the woodwork. However, prefinished is already finished with some great benefits: longer finish warranties, uniform stain application and a quicker installation.

Due to the sophisticated finishing systems on the hardwood products that we use, the finish is very durable.

Edge treatments refer to the amount of reveal on the edge of each board. We offer products in square, micro or eased edges or beveled edges.

Yes, however, it is not recommended. Once you wax a floor, it should be maintained as a wax-finished floor. Wax may inhibit the adhesion of future application of top coating materials or make it slippery.